Elm Creek Cooperative

Oil & Supplies Limited

 

Premium Products

Click on the logo below for more information.

 

 

 

 

 

For more information, contact the General Manager at

info@elmcreekcoop.com

© 2001Elm Creek Cooperative Oil & Supplies Ltd .PO Box 130 Elm Creek, Manitoba, R0G 0N0, Canada

 

Web site hosted and maintained by ProNetSolutions Inc. pronet@mts.net

 

Home | Hardware/Gas Bar | Bulk Petroleum | Service Centre | Grocery | General Info

Cardlock

Cardlock/Shower/Washroom Accessories 24hrs. a day:

 

 

 

Available 24 Hours:

Diesel

 Marked Diesel

Unleaded Regular Gas

Restrooms

Showers

Overnight Parking

Twin Hose

Satellite

 

During Store Hours:

Telephone

Tire Services

Oil

Farm Centre

 

 

 

Cardlock Operating Instructions

Follow instructions on display screen, & be sure pump(& satellite

if applicable) you wish to use is in the "OFF" position. 

DISPLAY SCREEN:

ACTION REQUIRED: 

1. INSERT CARD

Insert card in slot.

2. REMOVE CARD

Remove card immediately

3. ENTER SECURITY

Key in Security #. Press ENTER

4. ENTER MILEAGE (optional)

     ENTER MISC. (optional)

Key in mileage. Press ENTER

Key in unit #. Press ENTER

5. ENTER PUMP NUMBER

Key in pump #. Press ENTER

   Eg. 1. Diesel Fuel

         2. Gasoline 

         3. Propane

6. Begin fueling your vehicle within one minute.

     DO NOT USE PUMP UNTIL STEP 5 IS DONE

     Do not leave pump or nozzle unattended.

7. After fueling please turn pump (and satellite if applicable) to 

     OFF position to stop transaction. Hang up hoses. If desired, 

     proceed to activate TICKET RECEIPT PRINTER

8. Reinsert card.

9. Issue receipt YES/NO.

10. Do not pull receipt from TICKET RECEIPT PRINTER while 

       printer is operating. Wait for receipt printer to stop, then    

       take receipt.

In cases of emergency, push emergency key & pump will  stop. 

When safe, repeat procedure from beginning.

If you encounter problems or need assistance, please use the telephone located on or near the site.

Trouble Shooting

Problem:

Pump requested will not operate. Cardreader states "Pump Handle?" or "Turn Pump Handle Off".

Solution:

You may have turned the pump handle on before you requested the pump, or handle was left on from previous transaction. Turn off pump and start procedure again. Commence fueling.

. . . . . . . . 

Problem:

Pump has been selected and turned on, but no fuel is delivered from the nozzle when squeezed.

Solution [1]:

If pump is equipped with a twin hose (large & small nozzle), be sure the 3 port 2 way valve on the pump is turned to select the hose and nozzle you wish to use. Commence fueling.

Solution [2]:

If the pump is equipped with a satellite dispenser, be sure your main pump is turned on. If the 3 port 2 way valve is on the pump, be sure you have selected the correct hose, if necessary, to direct product flow. Commence fueling.

Solution [3]:

If the satellite is switched on, the main hose will not work. Turn satellite off, main hose will now work. Commence fueling.

. . . . . . . . 

Problem:

Pump is pumping and meter is running but no product is dispensed.

Solution:

Stop fueling and contact your nearest representative with details as soon as possible. 

. . . . . . . . 

Problem:

Fueling is complete, pump is turned off, but you cannot get receipt.

Solution:

Press clear on the receipt printer pad. Enter your card or CARD number. If there is no record of your transaction, try another receipt printer, if available on site. If you do not get a receipt, contact your Petro rep as soon as possible or phone: (306) 244-3197.

Back to Hardware/Gasbar page


Top of Page